I am trying to determine the Mitsubishi spindle drive motor that is on my 2002 Performer Jr. There are no motor data plates on it or places that look like a sticker came off. Can anyone provide the specs for this motor? I'm needing to get a new drive for it.
Thread: Akira Seiki help needed
Results 1 to 3 of 3
-
04-03-2020, 10:19 PM #1
Member
- Join Date
- Oct 2009
- Posts
- 84
Akira Seiki help needed
-
04-04-2020, 01:30 PM #2
Member
- Join Date
- Mar 2020
- Posts
- 4
Re: Akira Seiki help needed
Following
-
04-13-2020, 04:09 PM #3
Member
- Join Date
- Oct 2009
- Posts
- 84
Re: Akira Seiki help needed
We have it narrowed down to 2, with the probability of it being the driver MDS-B-SPJ2-37 and the spindle SJ-P3.7A or SJ-PF3.7-01 with the former being 8,000 rpm and the latter 10,000. Looking at the manual, my motor is 330mm tall, with both connectors on the side below the fan, so that would make it the SJ-PF3.7 as the 8,000 rpm spindle has a connector on the top section without a cooling fan.
Reply With QuoteSimilar Threads
-
Akira Seiki Manual needed
By farmequip in forum Machinery Manuals / BrochuresReplies: 6Last Post: 04-08-2024, 05:00 AM -
AKIRA SEIKI TC -500
By phucrobusl in forum Mitsubishi controlsReplies: 0Last Post: 02-07-2020, 06:30 PM -
Akira Seiki AS500T FROM files backup needed!
By John Keats in forum FanucReplies: 2Last Post: 10-10-2014, 02:56 PM -
Akira Seiki AS500T backup needed!
By John Keats in forum FanucReplies: 0Last Post: 08-23-2014, 02:35 PM -
Akira seiki
By HTMTRADER in forum Uncategorised MetalWorking MachinesReplies: 6Last Post: 03-18-2010, 11:04 AM
Tags for this Thread
Posting Permissions
