I got bcc yesterday and installed it on my laptop and called and got my registration #. I proceeded to start a project to get a feel for things. Then I went to extrude to entities and I get this alarm that basicly say I my computer is not big enough. Then did some looking and I just meet the min. for operating. So I loaded it onto my wife's laptop (hers is better/newer). I am new to this this is my first cad system. When I got it loaded on her pc I went to register it is says no unlock code. i did notice that the 2 user codes were different. So did I just make a costly mistake!!!!!! can anyone help?
Thread: I think I made a mistake!!
Results 1 to 10 of 10
-
07-04-2007, 03:22 PM #1
Registered
- Join Date
- Apr 2006
- Posts
- 109
I think I made a mistake!!
-
07-04-2007, 04:22 PM #2
Registered
- Join Date
- Jan 2007
- Posts
- 172
which version?
-
07-04-2007, 04:24 PM #3
Registered
- Join Date
- Apr 2006
- Posts
- 109
21
-
07-04-2007, 04:32 PM #4
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Call BobCAD and they'll should let you transfer the license to the other PC.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
07-04-2007, 09:06 PM #5
Registered
- Join Date
- Apr 2006
- Posts
- 109
Thanks I hope so!!!
-
07-05-2007, 08:24 AM #6
Moderator
- Join Date
- Jan 2006
- Posts
- 4396
You will have to de-authorize one PC to get the Codes for the other, but they will allow you to switch PC's
Originally Posted by mmachining
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
-
07-05-2007, 03:34 PM #7
Registered
- Join Date
- Apr 2006
- Posts
- 109
Thanks, That good news.
-
07-06-2007, 03:18 AM #8
Moderator
- Join Date
- Jan 2006
- Posts
- 4396
Always glad to give good news
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
-
07-06-2007, 04:18 AM #9
Registered
- Join Date
- Apr 2006
- Posts
- 109
Well I called and they the folks at BCC were great!!
-
07-06-2007, 03:31 PM #10
Moderator
- Join Date
- Jan 2006
- Posts
- 4396
They usually are very good with these situations. Originally Posted by mmachining
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
Reply With Quote
Similar Threads
-
Mistake Purchasing Bobcad
By 1toolmaker in forum BobCad-CamReplies: 80Last Post: 05-10-2007, 02:13 AM -
Design mistake
By nerginer in forum Waterjet General TopicsReplies: 5Last Post: 02-22-2007, 03:14 PM -
New guy makes first $$$ mistake
By RMagnusson in forum MetalWork DiscussionReplies: 13Last Post: 03-22-2006, 12:20 AM -
Did I make a mistake?
By Sleedo in forum CNC Wire Foam Cutter MachinesReplies: 3Last Post: 02-13-2006, 03:19 PM
Posting Permissions
