Hi Mazak guys,
I have a Quick Turn 15N with a T32B control. I'm having problems using extending/retracting the quill/tail sleeve using M codes. I get the illegal M code error. I believe this has to do with the R machine parameters (page 11), specifically R59. However, no matter how I change it, I'm getting the same error. If someone with the same machine (with working quill/tail sleeve extension/retraction using M codes) could take pictures of the parameter page (machine parameter page 11, but preferably all the pages if it's not too much of a bother) so I could compare them with my own machine, that would be great.
All the best,
Raz