586,060 active members*
4,487 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > HURCO > Hurco Hawk 5m major issues

Thread: Hurco Hawk 5m major issues

Results 1 to 2 of 2
  1. 04-08-2020, 01:16 PM #1
    Sandvet03
    Sandvet03 is offline Registered
    Join Date
    May 2017
    Posts
    58

    Hurco Hawk 5m major issues

    Long story short I was moving equipment and clipped the power wire shorting it and blowing multiple boards in the CPU enclosure.

    Machine powers up with a light on the INPUT key and I can press the green on button causing the flood coolant to activate. Both screens stay off and blank. I swapped the hard drive the color graphics card, the canbus control card and the Pentium motherboard card. Hard drive blinks green then blinks a few more times and stops. The +5v -12v and +12v leds light up. I get no lights at the control console except the Input. What is my next step for trouble shooting or any other cards I should look at to swap out?
    Reply With Quote Reply With Quote
  2. 04-23-2020, 01:02 AM #2
    Sandvet03
    Sandvet03 is offline Registered
    Join Date
    May 2017
    Posts
    58

    Re: Hurco Hawk 5m major issues

    Fixed kinda, multiple bad boars, bad graphics, bad processor, bad motherboard.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Hurco VMX42i and TM8i - Major issues
    By Edest in forum HURCO
    Replies: 1
    Last Post: 12-18-2018, 04:34 AM
  2. Major Issues with 2x Brand NEW vf4ss's
    By trickeng in forum Haas Mills
    Replies: 41
    Last Post: 03-27-2017, 02:15 PM
  3. Hurco Hawk 5D
    By dereksail42 in forum HURCO
    Replies: 1
    Last Post: 07-09-2012, 07:19 PM
  4. need major help with hurco bmc 25 y axis
    By yamracing in forum Community Club House
    Replies: 2
    Last Post: 01-12-2010, 04:54 PM
  5. CNCMaster Jr. Mill major issues
    By jacarpen in forum Benchtop Machines
    Replies: 23
    Last Post: 12-29-2008, 08:42 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules