I've been told that I can remove the J1 shunt to reverse the enable on these drives.
I have also been told that if I connect a resistor between the inhibit and signal ground it will also turn the drives enable off. Does anyone on here have any input on this.
Thanks Mike
Thread: AMC BE25A20 drives inhibit.
Results 1 to 1 of 1
-
04-10-2020, 08:16 PM #1
Member
- Join Date
- Mar 2005
- Posts
- 271
AMC BE25A20 drives inhibit.
Reply With QuoteSimilar Threads
-
Setting up AMC BE25A20 in torque mode?
By CATCH22 in forum Servo Motors / DrivesReplies: 26Last Post: 05-22-2020, 03:07 AM -
Axis inhibit
By stevewortley in forum Cincinnati CNCReplies: 4Last Post: 09-13-2016, 03:51 AM -
Driving Mitsubishi HC-KFS43 with AMC BE25A20
By newtechtooling in forum Servo Motors / DrivesReplies: 1Last Post: 12-27-2014, 06:06 AM -
AMC BE25A20 drive in encoder velocity mode.
By lucas in forum Servo Motors / DrivesReplies: 0Last Post: 04-02-2009, 06:58 PM
Tags for this Thread
Posting Permissions
