Re: Help with Okuma vertical mill 4 axis program codes
hy, why isn't your boss instructing you ?
tool allready in spindle, B axis in position
G15 H1 ( wcs )
G56 HA ( tool z offset )
M08 ( coolant )
S2500 M03 ( rpm, sense )
G00 Z0 ( clearance )
G01 X or Y F G95( move among X or Y, so to make contact between tool and material )
G91 ( incremental )
A180 ( 1/2 rotation )
A180 ( 1/2 rotation )
G90 ( absolute )
G01 X or Y ( disengage tool from material, go back to clearance positon )
M05
M09
G00 Z (up)
G00 Y (bring table close to the doors)
M02
this is all i can do now, i can't test the code / kindly
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg