547,383 active members*
2,533 visitors online*
Register for free
Login
IndustryArena Forum > General Manufacturing Processes > Drilling > PMC software for EPROM: LEADWELL TAPING AND DRILLING CENTER TDC-450 FANUC MC.
Results 1 to 1 of 1
  1. #1
    Member
    Join Date
    Apr 2020
    Posts
    2

    PMC software for EPROM: LEADWELL TAPING AND DRILLING CENTER TDC-450 FANUC MC.

    LS,
    I am looking for PMC software dedicated to two EPROM modules

    Machine name/model: LEADWELL TAPING AND DRILLING CENTER TDC-450 FANUC 0MC.
    TYPE: A02B-0100-B501
    Serial nr.: T9045062.
    DATE mnf: 1990-Nov.

    My EPROMs have been damaged but I can recover them. I do need PMC software dedicated to this machine.
    Any hints where/how to buy it?
    Thank you

    Arek

  2. #2
    Registered
    Join Date
    Apr 2011
    Posts
    787

    Re: PMC software for EPROM: LEADWELL TAPING AND DRILLING CENTER TDC-450 FANUC MC.

    You will need A08B-9201-J504#EN Software and PMC Writer + Cables A13B-0126-B001 or A13B-0126-B002

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •