586,106 active members*
3,031 visitors online*
Register for free
Login

Thread: encoder

Results 1 to 3 of 3
  1. 04-29-2020, 01:56 PM #1
    murphdog
    murphdog is offline Registered
    Join Date
    Dec 2009
    Posts
    75

    encoder

    Hello all,
    We are getting a 185 alarm when hooking up the HRT310 rotary. It is a brush type rotary going thru a Haas conversion box hooking to a 2008 VF4.Disconnecting the cable at the rotary and checking continuity to the plug ends the cable seems to be ok. Is it possible to test an encoder on a Haas rotary?
    Thanks
    Reply With Quote Reply With Quote
  2. 04-29-2020, 05:01 PM #2
    Machineit
    Machineit is offline Member
    Join Date
    Mar 2010
    Posts
    1852

    Re: encoder

    Quote Originally Posted by murphdog View Post
    Hello all,
    We are getting a 185 alarm when hooking up the HRT310 rotary. It is a brush type rotary going thru a Haas conversion box hooking to a 2008 VF4.Disconnecting the cable at the rotary and checking continuity to the plug ends the cable seems to be ok. Is it possible to test an encoder on a Haas rotary?
    Thanks
    Have you selected the proper unit in the settings?
    Two Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28
    Reply With Quote Reply With Quote
  3. 04-29-2020, 05:38 PM #3
    murphdog
    murphdog is offline Registered
    Join Date
    Dec 2009
    Posts
    75

    Re: encoder

    Quote Originally Posted by Machineit View Post
    Have you selected the proper unit in the settings?
    Yes. We are using the plain 350 rotary setting (brush type) because we are running this thru the Haas converter box that allows us to use a brush type rotary in a "brushless" machine. This is the same setting we have used before.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Broken BridgePort Encoder, Need new encoder or ServoMotor w/Encoder
    By TNBG_LTD in forum Want To Buy...Need help!
    Replies: 1
    Last Post: 03-18-2020, 08:54 PM
  2. Smoothstepper encoder setup with index out of encoder?
    By Rimbaldo in forum SmoothStepper Motion Control
    Replies: 5
    Last Post: 03-01-2020, 07:25 AM
  3. HOW TO CHANGE ACTIVE ENCODER FROM LINEAR SCALE TO MOTOR ENCODER IN SIEMENS 840D.
    By sandeepmb123 in forum SIEMENS -> Sinumerik 802D/808D/810D/828D/840D
    Replies: 0
    Last Post: 01-02-2014, 08:05 PM
  4. New Spindle Encoder Twice the Resolution of Old Encoder - What to do?
    By ecnels in forum Vertical Mill, Lathe Project Log
    Replies: 1
    Last Post: 10-12-2013, 11:39 PM
  5. How to tell if my motor is Pulse encoder or quadrature encoder?
    By Darc in forum Servo Motors / Drives
    Replies: 0
    Last Post: 07-22-2005, 09:51 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules