[cubby]

Name is: "BEST" Model FC300-4.0G-S2-B4C
4.0KW 220V
I need help with setting the Parameters on this drive to get Spindle to working,
My New CNC Build,
Surely someone else has ran into one of these rascals, LOL
Thanks fellers,,
cubs

[mactec54]

Name is: "BEST" Model FC300-4.0G-S2-B4C
4.0KW 220V
I need help with setting the Parameters on this drive to get Spindle to working,
My New CNC Build,
Surely someone else has ran into one of these rascals, LOL
Thanks fellers,,
cubs

What spindle spec's do you have I have that manual they are quite easy to set

[cubby]

Thank You so much Mac, I've fooled with this thing all day,, All I got it to do was Jog the Spindle, This is on the Motor Plate.
Model- GDZ105X102-3.5
Volts- 220v
HZ- 300
RPM- 18,000
KW- 3.5kw
Amp- 15 amp
Is.F - Poll 2

[mactec54]

Thank You so much Mac, I've fooled with this thing all day,, All I got it to do was Jog the Spindle, This is on the Motor Plate.
Model- GDZ105X102-3.5
Volts- 220v
HZ- 300
RPM- 18,000
KW- 3.5kw
Amp- 15 amp
Is.F - Poll 2

You should not be doing any jogging with a spindle like this, they are so easy to fry if you have the Parameters set incorrect so don't run it until I have time to spend on getting the parameters set for it, so no jogging