Weird issue that started ocuuring on our 3016L AC -5 machine. maybe someone can enlighten me. After a half day the machine suddenly doesn’t take my cd, dir, at commands and sits doing nothing. If I change to jog it slowly moves to the jog screen opening a numeral at a time or if menu opened it takes 2 minutes to load the menu page and I can no longer use the machine without shutting down and restarting. its basically like a laptop when it freezes during a render and you can’t do anything. The control cabinet felt warm but no errors of any kind. Any idea what may be going on?
Results 1 to 2 of 2
-
05-04-2020, 06:35 AM #1
Member
- Join Date
- Sep 2017
- Posts
- 143
3016 control slowing up and needs to be reset often
-
05-04-2020, 01:26 PM #2
Member
- Join Date
- Oct 2008
- Posts
- 1632
Re: 3016 control slowing up and needs to be reset often
No idea if yours is for the same reason but, are you running a Calmotion USB box? If so, go reboot it by removing the power to the box for a few seconds then reconnecting.
Mine will do the same thing, and once I reboot the Calmotion box all is fine.
Reply With QuoteSimilar Threads
-
mori seiki SL150 with MSC518 control need to reset tool turret position
By cncclimber in forum FanucReplies: 5Last Post: 11-16-2018, 01:12 PM -
Robofil Control Reset when Turn On Injection Pump
By mflux_gamblej in forum EDM Discussion General TopicsReplies: 1Last Post: 02-22-2018, 08:51 AM -
How do I reset a Fanuc 2000C control?
By Fadal Error in forum FanucReplies: 3Last Post: 09-14-2010, 04:17 AM -
tutor for fadal 3016 w/ 88 control
By Runner4404spd in forum Employment OpportunityReplies: 3Last Post: 02-25-2009, 10:13 PM -
On an OT control, hitting the reset button
By g-codeguy in forum FanucReplies: 3Last Post: 06-14-2007, 05:21 AM
Tags for this Thread
Posting Permissions
