[landslide1]

I'm trying to set my zero return on my old mill and the X and Z will zero return and set the parameters but the Y wont.

the Y parameters are not set yet and are zero in the parameters. the axis is slowing down but the xais stops before the switch drops off the back of the dog. it isn't on an overtravel it just stops like it has found home.

I have read a few posts mentioning the grid shift parameters 708-710 but they are zero already.

I think I can just move the dog back a little but i would perfer to change a parameter and have the machine reset the zero return for that axis.

anyone kow the paramter to modify?

[landslide1]

I solved it by jogging past the dog and inputting the value into the zero sep parameter and changing p22 to set for the y axis.