586,042 active members*
3,686 visitors online*
Register for free
Login
IndustryArena Forum > Laser Engraving and Cutting Machines > Laser Engraving / Cutting Machine General Topics > USBCNC RnR Motion USB Controller/Mach3 Setup with Sculpfun 5W laser

Thread: USBCNC RnR Motion USB Controller/Mach3 Setup with Sculpfun 5W laser

Results 1 to 2 of 2
  1. 05-17-2022, 12:11 AM #1
    smanzer
    smanzer is offline Registered
    Join Date
    Oct 2003
    Posts
    4

    USBCNC RnR Motion USB Controller/Mach3 Setup with Sculpfun 5W laser

    Hello fellow CNC'ers I built a machine a while ago, and have been looking to add LASER to the routing machine. I found a Sculpfun S9 5W optical power output laser for $179 USD. This is a nice laser and I wanted to hook it up using Mach3 with the RnR USB control board. There was no documentation for the RnR or Sculpfun so I had to experiment, google and scratch my head. If you run into the same problem, I have created a video to document the process - it is easier than I first thought, but took some time: https://www.youtube.com/watch?v=9pr3rpa4RIE
    Too many toys, too little time...
    Reply With Quote Reply With Quote
  2. 08-29-2023, 03:56 PM #2
    slorole
    slorole is offline
    Join Date
    May 2018
    Posts
    3

    Re: USBCNC RnR Motion USB Controller/Mach3 Setup with Sculpfun 5W laser

    Has any one Tried this ? I have ordered a 12volt power supply cause I'm running 24volts but I'm not sure I'm reading the drawing in the video right.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. CNCUSB USBCNC CNC USB alternative MACH3 USBCNC 2.14 a driver needed
    By andruszd in forum Controller Cards
    Replies: 1
    Last Post: 05-24-2020, 09:24 AM
  2. Datasheet for USB Breakboard CNC 4 Axis (RnR Eco Motion 2.0)
    By cebaldocchi in forum CNC Machine Related Electronics
    Replies: 0
    Last Post: 05-13-2020, 09:16 PM
  3. Setup and wiring of Mach3 USB 4 axis Motion Controller AKZ250 from Leafboy77
    By MartinBarfoed in forum Stepper Motors / Drives
    Replies: 11
    Last Post: 04-02-2019, 11:50 PM
  4. Mach3 USB Rnr motion control mpg connection
    By CrazyJane in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 0
    Last Post: 08-13-2018, 01:21 PM
  5. 4axis USB Motion Controller for Mach3
    By Quorim in forum Benchtop Machines
    Replies: 21
    Last Post: 05-07-2017, 12:57 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules