Hi there,
I'm on the road to make my cnc /ON, but i've to upgrade and cfg some inside stuff.
This is a China-cncrouter
For sure I've to determinate what is my VFD ? ... before/perhaps Ask Here for cfg for my Spindle.
And because I don't have the update MB3's AO-AG ouput for the analog, perhaps you have some return on my wiring/Mach4 cfg ?
At this time I've only and always a 10.4V on AO/AG output even if I decroisse the M3 Sxxxx gdi cmd, so I don't put AO / AG into the AI1 at this time !
Goal :
Have the full control of VFD/Spindle under Mach4 for Fwd and Rev if possible ... And for sure my cnc making some stuff on wood, brass, copper and aluminum
Other Infos :
Sources links :
- http://www.cncroom.com/downloads/MB3...al%20E13R2.pdf
- https://warp9td.com/index.php/gettin...ch4#EssSpindle
- Warp9 Video Tut
Thanks inadvance for any time on this,
HK, from France