Hi all,
If anyone's interested i'm planning to start work on building a smaller version of a Joe's 2006.
Would have liked to build it full size but just dont have the floor space in my work shop to dedicate to it. I have access to a couple of full size CNC router tables for larger work anyway, so my thinking is to scale it back to around 80% and give my self a usable cutting area of around 450mm x 900mm just for the convenience of having it in the shop.
It will be more of a desk top Joes version but running a router rather than a dremmel so it still has enough grunt and accuracy to cut stuff out.
I have done the prelim CAD work to size it the way I want allowing for the use of metric MDF sheet sizes.
It will be a bit of a long drawn out project, but it will get there.
Would welcome any advice along the way.
regards,
Gully