It came with Pul/Dir by default. As long as your motor is permanent magnet type it should be ok.
Results 41 to 42 of 42
-
08-13-2020, 03:31 PM #41
Registered
- Join Date
- Nov 2014
- Posts
- 4
Re: Help Me Drive Some Servos Please!
-
08-29-2020, 08:41 PM #42
Member
- Join Date
- May 2011
- Posts
- 790
Re: Help Me Drive Some Servos Please!
Some further emails with sales at JMC have clarified this a bit.
It's a 1000 line incremental encoder with quadrature encoding for 4000 CPR. Same as is on most of the Leadshine closed loop steppers.
Still have not made a decision.
Reply With QuoteSimilar Threads
-
Two servos on one drive?
By protman16 in forum Servo Motors / DrivesReplies: 6Last Post: 05-29-2008, 07:23 PM -
Baldor Servos And Drive
By Cycle Start in forum Servo Motors / DrivesReplies: 0Last Post: 05-29-2007, 01:28 PM -
Will Geckos drive these servos ??
By jsatter in forum Gecko DrivesReplies: 2Last Post: 06-28-2006, 06:29 PM -
Direct drive servos
By pstockley in forum Servo Motors / DrivesReplies: 11Last Post: 04-27-2006, 02:01 PM -
Servos and drive help
By tdpyro in forum Servo Motors / DrivesReplies: 3Last Post: 03-14-2005, 06:35 PM
Tags for this Thread
Posting Permissions
