[Pugman1]

Hi chaps. One of my stepper motors died yesterday, so I need a replacement. It’s only got a serial number on it. 85BYGH450A-06, the shelf dia is 14mm. I have tried asking a few retailers in the UK with know joy. Can anyone out there please let me know if there is a replacement for this motor and what it is. Please remember I am in the UK. Thanks, michael

[joeavaerage]

Hi,
there are suppilers advertising on the internet that exact model in China......its still on the planet???

Craig

[Pugman1]

Sorry your point being. I am looking for information on UK retailers, as I like to support small business in my own country.

[joeavaerage]

Hi,
laudable principle, and you may find a UK supplier but it will still be manufactured in China.

Craig

[dazp1976]

Hi chaps. One of my stepper motors died yesterday, so I need a replacement. It’s only got a serial number on it. 85BYGH450A-06, the shelf dia is 14mm. I have tried asking a few retailers in the UK with know joy. Can anyone out there please let me know if there is a replacement for this motor and what it is. Please remember I am in the UK. Thanks, michael

Is it this one?
https://www.automationtechnologiesin...85bygh450a-06/
If the holding torque etc is the same then this one below should fit the bill.

Slightly higher torque but the rest looks about the same. Does your driver go up to 5.5A?
https://www.amazon.co.uk/STEPPERONLI...rs=10937491031

The u.k. is absolute crap for buying anything. Country totally sucks!!!!
My entire setup apart from the manual mill itself I had to import from China.