Hi
I have a Leadwell milling machine 3 axis vertical Fanuc 18MC
The operator accidentally deleted the parameters.
Backup no longer exists only the parameter book where is also complete.
After entering parameters 100 - 9999, all errors that occurred were eliminated.
The control panel is working again, axes 3 are running again, no errors can also be moved to the reference point, tool change is working. The other parameters such as D, K, T were also included
typed with the greatest care and checked 3 times.
The only thing that doesn't work is the spindle !!
After command for spindle start e.g. S200 M03 nothing works !! Also M04 !! or other speed
Even if I specify a speed including axis movement, this sentence is without errors
processed even when the spindle is stationary !?
It is strange that the spindle orientation runs and executes it.
No error message on the spindle controller?
On the display on the controller 00 is therefore energized and without errors.
View does not come up with an error message.
When I try to turn the spindle in this state, the spindle keeps turning back.
Does anyone have an idea?
thanks in advance