I had to change my PC because of some issues with the monitor output , it was just easier and buying a refurbished PC on ebay with Windows 7 and 1 yr warranty is less than $75 so i did just that. The problem is now i get nothing from the motors? I use RS485 to control the spindle and that is working but nothing on the X Y A or Z axis, the newer_sh PC is running Windows 7 Pro. and I am not sure if that is the problem I have made the change in Ports and Pins as far as the parallel port goes and after that did'nt work I installed the Startech PCI board from another old PC thinking that was the problem and after changing to that Parallel port settings I do not get a green light on the C-10 BoB but if I change back to the Parallel port that came on the new PC the green and red light come on. So now i am pretty sure the onboard PP card is working. Keep in mind it all worked before changing PC 's and with the old PC I was using UC100 and C-10 for some reason I can't remember. So now I have this PC and a C-10 BoB without the UC100 that seems to be working but nothing coming out if the motors? I know I am missing something small and simple but my brain is dead thinking about it. Please let me know what it is I am missing and do I need the UC100, I don't think that works so well so I left it out .
Thanks
Pat