[gime911]

yo tengo algunas cosas tambien !!! si te sirve te paso

[kiteoo]

Hola Amigos alguien tiene los archivos del Taj Mahal puzzle 3d si pueden pasarlo gracias saludos desde Argentia...

[kiteoo]

No los tengo los estoy buscando ...

[kiteoo]

Aca estan los archivos del Taj Mahal

[kiteoo]

Archivos Taj Mahal Attachment 274296

[ctemin]

alguien tienes algun deses dos projectos( kremelin y un Taj Mahal diferente)?
Does anybody have these projects (Kremelin and a different taj mahal)?

[fonsecapia]

Hola!!

Alguien que por favor pueda pasarme un dxf de un elefante y un dinosaurio por favor?

De antemano muchas gracias

[gerza]

hola alguien que tenga una lampara para corte láser!!!!!!!!! Gracias

[yauco]

Hola!!

Alguien que por favor pueda pasarme un dxf de un elefante y un dinosaurio por favor?

De antemano muchas gracias

hola,
aqui va un archivo con varios dinosaurios, el elefante no lo tengo en dxf

[Holzy]

First off there are some awesome puzzle dxf files here. So I have a question about the eagle and dragon ones that I found in this thread. My stock is a round piece of stainless steel that about 6.46 inches round and about .075 thick. Would I have to change the sizes of the gaps that connect the pieces together? I'm also trying to make them like the size of a 20oz soda can. Resizing them shouldn't be a problem should it? I was planning on separating the parts so that I can use that round stock so taking them and rearranging them to fit 3-4 of my stock also shouldn't be a problem either right. If anyone could help me that would also be much appreciated!

Thanks in advance
Holzy

[Holzy]

First off there are some awesome puzzle dxf files here. So I have a question about the eagle and dragon ones that I found in this thread. My stock is a round piece of stainless steel that about 6.46 inches round and about .075 thick. Would I have to change the sizes of the gaps that connect the pieces together? I'm also trying to make them like the size of a 20oz soda can. Resizing them shouldn't be a problem should it? I was planning on separating the parts so that I can use that round stock so taking them and rearranging them to fit 3-4 of my stock also shouldn't be a problem either right. If anyone could help me that would also be much appreciated!

Thanks in advance
Holzy

[aliekber]

tnhx

[Mikomor2011]

[coutoviana]

Aca estan los archivos del Taj Mahal

thanks

[geoglok]

baixei este arquivo e estou encontrando dificuldade em montar tem como o senhor postar mais algumas fotos dele pronto para que eu possa montar

[unnimaliackal]

Thank you Ray

[kongt85]

thank you!

[cncjack01]

[ATTACH=CONFIG]344056


Jinan Blue Elephant CNC Machinery Co.,Ltd
Contact:Jack
Email:[email protected]
Whatsapp/mobile/Wechat:0086-15064026772
Skype:elephantcnc
QQ:3001738567
Web:Jinan Blue Elephant CNC Machinery Co.,Ltd.

[ruslanriad]

thank you

[m4sh1mar0o]

Thankyou for sharing. It help me so much to learn.