Hello,
We purchased a used 2003 Onsrud CNC router that has a fixed gantry, dual 5x5 tables, 12 tool changer, and an aggregate head attachment. This router has the nee Amc controller and the kollmorgen motors and drives. We have mastercam and a post from postability. We purchased this router thinking it would be like some of the ones we've use before, however we need some help getting started. We are not really interested in paying Onsrud almost 10k for them to help us due to the initial cost of the machine and the current state of the world. We are willing to pay someone for their time to come in and work with us on it though. We are located in NJ just outside Manhattan.
Best,
Ryan