Hi Guys, I dont know if this is the best place for this post. I didn't see a Lagun specific forum.
I have an old Lagunmatic 250 that i'm working on getting into operating condition. I was getting ready to do a trial part a couple days ago and the 2 speed drive made a weird noise and the selector handle popped forward out of high speed position. i also lost ability to change hte speed with the hand crank.
i took the hand crank plate off and found that the pin for the chain failed which allowed the tapered pulleys to move apart and now the belt looks to be jammed in farther than it is suppose to go.
I think i need to tear down the entire assembly and see what else looks broken.
does anyone have any tips or cautions before i start? I think i need to pull the spindle motor off so that i can take hte top half of teh case off.