[ccm]

Ok, so my first run at cnc converting my HF mill I've run into problems.....and I've figured it down to the steppers that I've been trying to use. So can someone recommend a used electric motor dealer / website or realistically priced new nema 23 or 34 sized steppers. Everything I've found has been alittle pricey for my blood. And being the first attempt at this I don't want to break the bank doing it, but also I'm not a cheapy....I just know bloated prices when I come across them, since I've been in and out of electronics for the last 18yrs.

thanks,

arthur

[Stevie]

Japan Servo KP86SM2-002 Stepping Motor
2.35 VDC, 1.8 Degrees/Step
$ 45.00 US each Please visit: www.torontosurplus.com for further details.
They are bipolar 2.5V @ 4.1 Amps
DIMENSIONS:
Body: 3 3/8" Diameter x 3 3/4" Long
Shaft: 3/8" Diameter x 1 3/8" Long
Distance between centres of screw holes: 2 23/32"
4 Leads,
BRAND NEW, UNUSED!
$ 45.00 US each


I have 3 of these
about 310oz/in
I can't stop one with my hands for sure; I've managed to stop it with the endstops through; but thats good

[ccm]

Ah...yes I came across these yesterday....but I need unipolar motors unfortunately....

thanks

arthur