Hello All,
I am considering building an Avid Pro 5' x 10' to be used to cut thin sheet aluminum as well as MDF and Plywood. I will be cutting parts for a homebuilt airplane. I also need ATC and looking at the S30 spindle or the Chinese ATC spindles. Curious what everyone's thoughts are on these machines and if anyone is using them to cur sheet aluminum. Mostly will be .025" to .04" thick. Also considering Clearpath Nema 34 Servos and curious if anyone has these installed on an Avid Pro.
Open any and all Suggestions or advice.
Best regards,
Marc