Hi, I acquired a 3040 CNC from a shop clearance, and need help setting it up - I'm new to this type of toy so any help is appreciated.
From a scribble on the chinese translated instructions, I think the model name is 'Dongda ts-3040c'.
It looks to be the same (visually) as the machine and controller in this eBay listing;
https://www.ebay.com/itm/4-Axis-CNC-3040-Router-3D-Engraver-PCB-Wood-Engraving-Mill-Drill-Cutting-Machine/163956088989?
It came to me disassembled in a slightly damp crate, with no software/driver CD.
(the machine seems in reasonable condition, no significant rust, does not bind when I move the motors manually, they hum reassuringly when powered on while not plugged in, and the spindle powers as expected)
I have downloaded Mach3 to my computer, and plugged it in via parallel port.
I have changed the input/output pin and some motor settings as prescribed in this rubbish instruction manual;
https://www.scribd.com/document/1765...for-Cnc-Router
It still is not responding to any inputs, jogging etc. What are my next (first) steps?
Thanks