I’m running a job in a Star SR-38 type B with a 31i-Model B5 Fanuc control. The print calls for a 96 knurl, during the run of the first piece I got a SV0436 error while cutting the knurl. At first we thought it was a tool load issue so we played around with the cut depth and the rpm to see if it would work better. I was able to make 6 parts successfully and then 2/3 the way through the 7th piece I got the SV0436 error again. Does anyone have some tips?
Original RPM was 175 with a cut depth of 0.46 on 1/2” with a feed of .005 IPR
Changed to 250 RPM with a cut or 0.47 with feed of .005 IPR