Hello, all
Need some help to setup VFD to UC300ETH-UB1.
Read both manual for UB1 and VFD HY. not much on how to setup wiring.. Most of the information i got from reference on YouTube.
On my diagram hive following wiring set, except the last wire (AH1), which im not sure where it go.
On the VFD pin 1,2 are jump for external connection.
From VFD DCM+FOR connected to UB1 on ON/CM1 relay
The other configuration came up with:
AL1---> VFD---> ACM
AO1--> VFD---> AL
AH1--> VFD---> not sure
If anyone can help me connect this right way., So i don't end up doing damageto VFD or UB1.
Appreciate all the help i can get...
And to everyone be safe out there.