As a rookie, this is my first post. Sadly, it should have been the first place I came. But also a rookie mistake, along with the one that cost me 1 insert and 1 body this afternoon.

Below is the program... know that I have spoken with Manuel and he was no help, nor was my searching the web either... The program runs all the way to the G83 command line. It then DWELLS at X1.50 Z0.25 and does nothing... My rookie mistake, Changed to G87! Thank God that only a body was lost!

Any help with this matter is VERY MUCH Appreciated!

Thank you in Advance!

P.S. I have tried G97, G98, G99 in different fashions, none of that changes things. I have even added the G99 code in the Drill Line. (Got that from an example program from Manuel)

%
O3051(2.375x6.00 CR Slug)
G30U0W0
G54G40G80
G18G20
M01

N1T0808
G97G99S1234M74
G99
M19
G00X1.5Z0.25M08
G83X1.5Z-6.50R0.Q2500F.050M37
G80M09
M38
M75
M18
M01

G0G30W0
G30U0
M30
%