Hi all,
Im a 100% NEWBEE in CNC.

Im a retired Telecoms Engineer from the UK, and just to pass the time and enjoy a hobby !! I am buying a 1325 CNC machine to "play around " with.
I can easily make all the electronics and understand them, BUT CNC carving is LATIN for me !
I would like to engrave DOORS (double sided V bit carving)
{Sorry I passed 38 years in France and mix up English and French}

The wood here in African RED wood which is fairly hard, i can get it in 4cm 5cm and 6cm thick.
I think a V bit will be able to grave some nice paterns , BUT how DEEP shoud i go ??? I think a main front door to be secure should have some wood left on it to resist agressions... And If i grave each side on lets say a 4cm door how much thickness will be left ????
The doors will be made up with 5-7 planks in red wood, glued together and around 2.8mt long. Surfaced, then carved .. so What thickness should the wood be to have a good looking carving each side AND leave some wood on there .....

Could someone help me with this question..
Thanks all
DAVID