Hello, I’m needing help with a 2 axis lathe, Cnc control system, The issues I have is that the battery was pulled out of the control and all the paperwork and backups were tossed in the trash, while I was out dealing with health issues, I was not aware of this at the time, and I’m trying to get it back up, if anyone has anything they can share with me on this Meldas 50 Cnc control it would be a blessing, I was told by Mitsubishi that my ladder should be intact, the retrofit was not logged with Mitsubishi at the time, so there is no backups that I can get, the original company that performed the retrofit is no longer in business.The machine is a SMT ST 14- Cnc 220, 6” through hole twin chuck