Our Operator over travelled in Fanuc Oi-TD lathe machine.
He did the power cycle of the machine.
We got 4 alarms
EX1009 TURRET NOT ORIENT
EX1008 TURRET NOT CLAMP
EX1070 DOOR NOT CLOSE
EX1000 EMERGENCY STOP
Then we checked the PMC alarm. It has 2 Alarms
ER32 NO I/O DEVICE
ER97 IO LINK FAILURE (CH1 00GROUP)
We checked all the fuses. one fuse was blown from I/O board. Replaced it.
Still getting the ER 32 and ER97 alarms.
What could be wrong?