I'm very happy about the new lathe and mill posts in fusion360 for planet cnc controllers.
However, I'm trying to make the tool change work on my lathe with the tool table and am having issues.
the post puts the tool change (Tn M6) on the same line as the G43.
this does not seem to work correctly.
when I try entering a single line with this command, the G43 does not change the offset.
If I enter 2 separate lines (Tn M6 followed by G43 in next line)
then it does change the offsets correctly.
Also, with the code as posted from Fusion360, using turret 102 (QCTP -x) in the tool setup, the TNG displays the cutter path correctly for each tool, but not in the correct relative location on the screen. each tool has xz coordinates that match the code, but the display shows the same xz location in different places on the screen, which seems to be from incorrect application of the offsets in the table.
I have tested the offsets for each tool by keying in for instance T1 M6 enter then G43 enter.
for each tool I then verify that the tool is in the correct xz zero location. So I know my offsets are correct.
I am hoping there is something simple in the setup that explains this. Any help appreciated.