[N.V.M.]

i'm having an issue when i run material in a mirrored field. my Busellato Jet 4000(1999) which runs off Genesis, parks the head to the far right when running in a normal field. but when i run material in a mirrored field,which is on the right, it still parks to the right, which is now in my way when the operation is complete.

any idears? i notice whenever i write a program through Genesis or even post through MasterCamX(with Busellato post add-on), it'll automatically end any operation with a "MO2" code,which i believe is the parking command. i've tried to manually rewrite the code to "MO1" or "M03", but it won't accept that line. thanks-Mike

[MarkT]

N.V.M.,
The M02 command is only a misc. G-Code that thats purpose is to stop the program. Within the Genesis folder you will need to Technical Parameters file and within the Axis Data or Head Data there a fields which you specify the cordinates of the park positions and which is used for which working zone. I did this from memory, so if you have any problems call Delmac and they can guide you through this easily over the phone.
Hope this helps!
Mark T.
www.cnccustomservices.com

[N.V.M.]

thanks Mark, i'll poke around in the Parameters again tomorrow and let you know. and Delmac won't help me because believe it or not, i'm not in the U.S.A. :bs: you know how territorial these industrial machine companies are. i usually have to phone Italy directly to get answers.