I started it up yesterday and got this. It is an older machine a 1994 vf-2. Haas tech thinks it is spindle driver. I opened the back and there is no life showing on spindle drive. I have power to it.Is there any thing else I should check? Where can I get a rebuild or a good used one if this is the problem?
Results 1 to 3 of 3
-
07-24-2007, 11:49 PM #1
Registered
- Join Date
- Jan 2007
- Posts
- 34
149 alarm spindle running need help!!!
-
07-24-2007, 11:51 PM #2
Registered
- Join Date
- Jan 2007
- Posts
- 34
It is a gpd 503 driver model # ds308 spec 25p51e.
THANKS FOR ANY INFO AT ALL.
-
07-25-2007, 02:51 PM #3
Registered
- Join Date
- Sep 2006
- Posts
- 296
http://www.cnczone.com/forums/showthread.php?t=22019
This may help if you need a rebuilt drive. My 94 VF-1 blew the spindle drive 2 weeks ago.
Reply With QuoteSimilar Threads
-
Spindle Alarm
By phoodieman in forum Daewoo/DoosanReplies: 2Last Post: 03-17-2007, 01:06 AM -
Alarm 149 Spindle turning *HELP*
By ali203joe in forum Haas MillsReplies: 3Last Post: 02-22-2007, 12:54 AM -
Spindle not Running
By Simon Lee in forum DIY CNC Router Table MachinesReplies: 1Last Post: 02-09-2007, 06:56 PM -
Running a Fanuc spindle motor
By Fudd in forum Uncategorised MetalWorking MachinesReplies: 3Last Post: 11-11-2006, 04:21 PM -
Spindle quit running w/ c axix fault
By TomCNC88 in forum FadalReplies: 7Last Post: 07-28-2006, 04:07 PM
Posting Permissions
