544,035 active members*
2,047 visitors online*
Register for free
Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2006

    Belt and Chain Tension

    Dear Experts

    As u r aware, in case of machining centers, it takes lot of time to open the covers to check belt and chain tension say in case of ATC Magazine & restore
    Was wondering if there is any other better way of doing this at less time
    Kindly suggest

  2. #2
    Join Date
    Jun 2015

    Re: Belt and Chain Tension

    hy rishikesh some panels arround here have been removed from the machines, or modified in order to put them fast on / take them down fast ( by leaving the screws where they are ), allowing easier acces to lathe spindle & tailstock, mill spindle belts & atc, etc

    pls check modification in attachment; sorry for the rough sketch / kindly
    Attached Thumbnails Attached Thumbnails Untitled.png  
    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg

  3. #3
    Join Date
    Dec 2006

    Re: Belt and Chain Tension

    Thanks for your prompt response

Similar Threads

  1. Mv 35/40 spindle belt tension
    By fordman300 in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 05-23-2012, 02:40 PM
  2. taig mill belt tension
    By zli in forum Taig Mills / Lathes
    Replies: 2
    Last Post: 07-06-2010, 12:16 AM
  3. at5 25 wide timing belt tension?
    By DanOSB in forum Linear and Rotary Motion
    Replies: 3
    Last Post: 09-27-2009, 05:45 PM
  4. Belt Tension Options??
    By flash319 in forum DIY CNC Router Table Machines
    Replies: 5
    Last Post: 09-19-2007, 08:06 PM
  5. Belt Tension Adjuster Design
    By mxtras in forum Mechanical Calculations/Engineering Design
    Replies: 8
    Last Post: 05-16-2005, 04:33 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts