I have 2 hardinge chnc1's and I can get one of them to send and receive programs but I can't get programs load on the other one. I'm getting 086 alarm and 071 depends on the day.. I changed the settings on 552 and 553 to the same as my other machine and still no luck.
This machine is new to me & the previous owner delted Prog 09150 and now it won't let me bar feed because there is no collet delay program.
Results 1 to 2 of 2
-
08-23-2023, 07:20 PM #1
Member
- Join Date
- Aug 2010
- Posts
- 75
Fanuc OT 086 and 071 alarms cannot load programs. Missing P09150
-
08-23-2023, 08:07 PM #2
Registered
- Join Date
- Apr 2009
- Posts
- 108
Re: Fanuc OT 086 and 071 alarms cannot load programs. Missing P09150
It could be some of the other settings. Take a look at the attachment from Memex. Pages 7 & 8 go over the parameter configurations.
This is a link to a video I made on RS232. It may help.
https://www.youtube.com/watch?v=R9BOO6iny_I
Reply With QuoteSimilar Threads
-
P/S 071 Alarm on Fanuc O-TT but can't figure out why?
By kmcmillen571 in forum FanucReplies: 5Last Post: 04-04-2023, 06:37 AM -
missing or copied programs FANUC series oi-TC
By CNCmachado in forum FanucReplies: 7Last Post: 02-18-2013, 03:17 AM -
086 Alarm on Fanuc OM
By darrylh in forum FanucReplies: 20Last Post: 07-13-2009, 02:59 PM -
can't load programs to Fanuc
By rookieee in forum DNC Problems and SolutionsReplies: 11Last Post: 02-23-2008, 01:23 AM -
Tool Load Alarms
By BAD DOG in forum Daewoo/DoosanReplies: 0Last Post: 03-18-2007, 11:25 PM
Tags for this Thread
Posting Permissions
