What would be the best toolpathing or processes to best achieve the fillet on the part attached. I am a student working from home so I'm only limited to Mastercam 2021 HLE. Thank you.
What would be the best toolpathing or processes to best achieve the fillet on the part attached. I am a student working from home so I'm only limited to Mastercam 2021 HLE. Thank you.
2 options
A... corner rounding tool ... go around in 1 pass ( as long as there is clearance)
B... Surface Finish Flowline.... drive surfaces are those that form the radius.... you will need to set cut/step direction ( cusp size is what controls your stepover)
Or a 2D swept...
Also Surface Waterline or Morph in Multiax.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .