It is not really a gamble when the machine is set up correctly and doing routine running on light alloy parts. If you are doing something exotic then it is not a gamble either it is silly.Originally Posted by binzer
Thread: Walk away from a machine?
Results 1 to 20 of 30
Threaded View
-
07-27-2007, 09:25 PM #8
Gold Member
- Join Date
- Jul 2005
- Posts
- 12177
An open mind is a virtue...so long as all the common sense has not leaked out.
Reply With QuoteSimilar Threads
-
G Code Variances from machine to machine?
By Miguel Gonzalez in forum G-Code ProgramingReplies: 16Last Post: 03-28-2007, 09:31 AM -
stop the walk
By omegaghost in forum Benchtop MachinesReplies: 4Last Post: 01-15-2007, 06:10 AM -
Mach 2 on old machine = great machine
By foamcutter in forum Machines running Mach SoftwareReplies: 6Last Post: 12-16-2005, 07:11 PM -
ok need the walk through on auto cad to boss8
By IeatSteel in forum Bridgeport / Hardinge MillsReplies: 1Last Post: 10-26-2005, 12:21 AM -
Getting work(gcode) from machine a to machine b
By strat in forum DIY CNC Router Table MachinesReplies: 9Last Post: 07-07-2005, 08:13 PM
Posting Permissions
