I recently picked up a used Syil X6 with a gutted electrical cabinet and I am looking for pictures of the inside of the electrical panel so I can see how Syil laid out the original cabinet. Thanks for your help.
I recently picked up a used Syil X6 with a gutted electrical cabinet and I am looking for pictures of the inside of the electrical panel so I can see how Syil laid out the original cabinet. Thanks for your help.
They use different controls on some of the same machines, so a photo of the layout might only at best be generically helpful.
Realistically if you're going to set up your own controls for it you just need to set up your own control layout for it.
Once you figure out all the controls you're going to use set them on the table and look at them and look at the cabinet and decide where you would put them to make it the easiest to wire and route wiring.
Bob La Londe
http://www.YumaBassMan.com
Thanks for the reply, that is exactly what I ended up doing. Got it all wired and everything working except I am in need of a replace LCD screen. I have contacted Syil about a replacement but have yet to hear back from them.
Hi!
I am having the same issue, I can figure out what is what in the back of my machine.
Could you please take a picture so that I can see what is wrong with mine?