I have decided to sell my Grizzly G0704 that I converted to CNC a while back. I am selling because I have another CNC conversion almost complete and I no longer need this machine. I did use it tonight to make a few pieces and everything is working fine. Here are the specs and what is included
- Grizzly G0704 benchtop milling machine with stand and roller base
- Stock spindle motor
- Head spacer
- Column spacer
- Micro-V spindle drive
- 570 oz-in low inductance stepper motors on all 3 axes
- Keling 6050 drives on all axes
- Inductive limit/home switches (Very accurate homing)
- parallel port interface
- 50V computer server power supply (better than the cheap switching supplies)
- Old HP desktop computer with LinuxCNC installed (Old but works fine)
- 14 or 15 inch (can't remember which) flat screen monitor
- Keyboard and mouse
- Computer stand
- Includes drill chuck, key and arbor and tools for drawbar
- Used 4" keyed vise available for additional $50
I'm only asking $2000 ($2050 with vise), which I think is more than fair considering that a non-cnc G0704 currently lists for $1650. The machine is located in Morris, Illinois, about an hour southwest of Chicago
PM me if interested or e-mail me at j dot brannen at yahoo dot com
and here are some pictures: