Re: Can't run spindle with door open on my brand new ST-20Y!
we just received a new mill,same thing there is not a option to disable door switch to my knowledge in the control like the last machine (2007)
i took a feeler gauge and affixed it with magnets under the limit switches on the doors to trick the door into thinking it was closed when it was open.
i also unplugged the air solenoid for the door lock mechanism.
this worked for me.
2007 Haas TMP-1 Microscribe MX-5 Mastercam X4 Mill Level 3 Surfaces,Solids Seagate 2 tb hard drive AMD 64x2 8gig ram windows ultimate 7 64bit Geoforce 8800 GTX