Hello.
I have a Promecam STP-C pressbrake with a DBM-A control from 1984. One scale is bad and propably need to be replaced. The original is a Heidenhain LS513-scale. I have been in contact with Heidenhain and according to them there is no scale available that would work. The old one have a signal-period (dont know if its the right term) of 40µm but all the new ones have 20µm. Is it possible to convert the signal from 40µm to 20µm in a simple way? Any other ideas how I could fix the problem?
Thanks!
Best Regards, Samuel