Hi
I imported a IGS file but the part is composed with just surfaces and i wanted to know how i create thickness because when i create the toolpaths all the walls desappears.
Tks
Hi
I imported a IGS file but the part is composed with just surfaces and i wanted to know how i create thickness because when i create the toolpaths all the walls desappears.
Tks
You can not make them thicker as they are surfaces now if you turn them into Sheet solids then you can thicken them. but I do not think this is the problem I would look at your programming method's.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .