I have a problem with my machine, it is cutting with different sizes along the X axis, I have already checked the mirror alignment and it is 100%.
I was working with a cut of 2 pieces from the side of the other, the first is in the exact size, the second one was 0.6mm bigger.
Attachment 453996
The difference between them.
Attachment 453998
I decided to make a test during the entire table (1300mm) making 3 squares and see the difference in measurement.
Attachment 453992
The difference
Attachment 453994
The bigger the piece, the bigger the difference.
I work with absolute coordinate, the reference of the machine is on the top-right and my workpiece start on the top-left.
I decided to do another test only in the middle of the machine with Current Porition to see if it was a problem in the RDWorks coordinate and the problem continued, the piece got bigger.
Regardless of the coordinate system or position in RDWorks, the problem remains the same on the machine (at the left (0 to 25cm), the size is perfect, more to the right above 30cm the pieces is larger)
To prove it, I made a ruler with strokes every 10 mm over 400mm, until the 250mm the strokes remain the same, above 250mm it starts to get bigger.
Attachment 454000Attachment 454002Attachment 454004
I use RDWorks 8 and the controller board is RUIDA.
Has anyone had the same problem or know what it might be?