We have a Cincinnati Milacron Arrow 500 "1996" Milling Machine, It has a Control Techniques Control and we lost all parameters.
Any body out there knows how to set them back ,or where can we get them?
We have a Cincinnati Milacron Arrow 500 "1996" Milling Machine, It has a Control Techniques Control and we lost all parameters.
Any body out there knows how to set them back ,or where can we get them?
You can try and call Robert Varney at 1-859-534-4748. He worked for Cin. Milicron before the split and now for MAG. He was their CT specialist. He should be able to help you out some way. Best of luck! PS: he could also give you info on a retrofit possibly for that controller. If your interested, ask about the MachineMate. We have one and it was the best thing for our Arrow750. Our CT was a major pain and costly.
If it's actually yet, i have some backups of some versions of Acramatic.
Hello Guys
I have seen you may be have the parameters back up for some Cincinnati Machines.
I have a Milacron Arrow 500, con Controller of Control Techniques, we lost the parameters in the memeory module as batteries were not changed properly.
I will appreciate if you send me those and if you can let me know how to download to the Machine.
this is my email [email protected]
where should i get information about cnc machines?