Hello,
I was gifted an unused Vortech CNC. I was able to power it on with a standard 110v computer cord, which is what the socket looks like. I’m confused by the fact that the power supply, VFD and spindle say 220v. It’s a 2.2kw spindle. Unfortunately, all of the components are Chinese and without clear model numbers, it’s also apfairly dated, so manuals are scarce. My direct question is: could this be a 220v machine and a plug I’m not used to see wired for 220v. If so there are only two wires on the back of the socket In the machine. I’ve read about the 220v setups without the traditional American wiring conventions, but I admit I just don’t understand this. Any help is spectacularly appreciated, I’ve reached the scrapings at the bottom of google and still head scratching. Thank you!