Mactec54 thank you for your help. I made this settings which you say . Now maximum speed is 16000 rpm . I have a another problem . When I stop with stop button on the inverter the motor is still working with 1700-1800 rpm and it dont want to stop. Would you help me to figure out how to remove that problems.
I also try to connect the inverter to the mach 3. I read in the forum but i dont find what to do. I made some pictures of the wiring .
https://ibb.co/3cD2HX4
https://ibb.co/4mqyPWT
https://ibb.co/XsFW8Np
https://ibb.co/r2FzV3c
Would you tell me how to connect the inverter to the cnc board and how to change mach 3 settings ?
Thank you and have a nice day.