I still am puzzled why posters quote stepper motor oz-in/N-cm by quoting a NEMA size?
NEMA 23 is a stepper motor with a 2.3×2.3 inch (58.4×58.5 mm) faceplate
My Vexta catalogue shows 9 steppers motors from 38.2N-cm to 132N-cm, ALL with the NEMA 23 mounting base size.
Results 1 to 20 of 54
Threaded View
-
01-13-2021, 10:20 PM #29
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24223
Re: Replacing steppers for more torque options / Advice wanted
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With QuoteSimilar Threads
-
Stepper sizing options based on torque curves
By planckscale in forum Stepper Motors / DrivesReplies: 0Last Post: 06-05-2019, 02:11 PM -
Step motor weak holding torque after replacing board.
By Foxrena in forum Stepper Motors / DrivesReplies: 3Last Post: 03-29-2013, 01:40 AM -
Replacing nema 42 steppers with servos
By bseibenick in forum Servo Motors / DrivesReplies: 0Last Post: 05-04-2008, 04:47 AM -
Replacing steppers for servos
By TT350 in forum Tormach Personal CNC MillReplies: 2Last Post: 10-09-2007, 01:12 AM -
Torque of 5 1/4 FH Drive Steppers?
By Rance in forum Stepper Motors / DrivesReplies: 1Last Post: 03-09-2005, 08:22 PM
Tags for this Thread
Posting Permissions
