Mactec54
I cant find anything more than this on the spindle.
Voltage 220
Current 10amp
Phase 3
Frequency 0-400Hz
Speed 0-24000rpm
Collet ER20
Bearing Ceramic
Where / what more should I be looking for?
2.2Kw
Mactec54,
Any more thought on what
PD006=
PD009=
PD007=
PD010=
should be for a 2.2 air cooled spindle?
They did not have a recommended min speed. I currently have it set to 6000 (100Hz)
Mactec54
Even though I have run it at 6000 for up to 30 minutes without it getting warm (just breaking it in), I don't really need that low a speed except for occasional drilling. I could adjust my settings to 120Hz (7200) easy enough.
I've changed my VFD to 120 for minimum speed. Any more input for
PD006=
PD009=
PD007=
PD010=
Now?