Hi All,
so i have a few of these machines and never really had any problems.
I recently got another 3 but 2 of them are having issues with the Y axis. All mirrors aligned and the machine cuts no problem at all. But when it comes to engraving it does not come out well. So it looked like the image was being stretched on the Y axis. With this in mind, i cut a simple square 170 x 170mm.
The X axis measures 170mm as expected but the Y axis measures 180 which suggests its stepping to far and ultimately why i can cut but not engrave.
Im using RD Works and I'm sure this is a simple setting that i have missed so i would appreciate any assistance. I have attached a picture of the messurements.