We are looking at purchasing a new fiber laser with a 5x10' bed along with a tube attachment. Ideally we would like to be able to cut 3/4" mild steel, 1/2" stainless and 1/2" aluminum, but most of our sheet materials will be 1/4" or thinner. Basically that puts us in the 4-6kW range depending on who you ask.
Due to our budget we are likely looking at a foreign made machine, but finding any reviews on machines has been a struggle. Below our the companies we have found that have a machine that fits these basic parameters, but I was curious if anyone had any feedback or suggestions on any company they are familiar with. Thanks!
Bodor
HSG Laser
Gweike
KRRASS
XT Laser
Golden Laser